My greetings to all my dear friends in this community, the most valuable electrical items in the house are not easy to repair when they break down, if the manufacturer should repair it, it would have been repaired immediately. Because the company has all the procedures and its details and if a common mechanic wants to fix it, after thinking for a while, they try to fix it with the transistors and the Justin. And besides, the small connections that pass the current cleanly and in small quantities, if it is working properly, be it a TV or any other electrical machine, it works fine, if it malfunctions, it shuts down. This is also a television kit
If you look at the back side, there are small stitches on it and it is written in English and the line is also made which way this connection is going. There are and are separated from each other. Everything is kept to its limits and if there is a fault in it, there should be a mechanism to find it first, after finding it, replace it and After that play it again and see if it is correct then the TV will work
Be it LCD or TV, a very important card installed in it, apart from which no image can go forward or enter it, is called TV card with in-out audio and video installed in it. And besides RF connection through which the cable network can be viewed and the LED can be driven from the dish receiver through audio video and also the direct cable installed by modern technology which gives more results. It can be viewed by computers and some receivers, and all that matters is through the card you're looking at.
How it is repaired and repaired what is damaged is replaced and all that is possible with the help of this kavya it is heated and placed in front of it and then a part is removed from the kit. And a new one is installed in its place, then the cut is completed
Sometimes the connections are shorted and the fault in the kit is not visible and the most that is needed to find the fault is a meter with which the entire kit is checked. And the fault in it is also removed
There is also a lot of equipment in the television kit through which the connection goes to the picture tube and sparks come out from inside it and it is called fly, its current is very high and if in this whole cricket If something goes wrong it is very difficult to find it so very few people have TVs and very few TV mechanics and mostly LED mechanics are working.
That's why the mechanic has to think hard to find the solution and for that he gets his hard work when he clears the fault. There are many things that are a challenge to fix. It's hard and I've seen a lot of things that didn't get fixed and ended up in the trash.
This is my first post in this community hope friends will like it please share your thoughts I wish all the best to all friends in this community.