Had a bit of a lazy Saturday, I went to bed fairly late on Friday and so with the kids seeing their mom I figured I could have a nice nap,
Woke up about 5 and then I started to do a bit of work, I printed some stuff and fixed on of my printers but I will get into that a bit later in this post.
What you see above is a lil project I worked on last week.
So I got these extra batteries and charger for a Camera I no longer have, this would be utterly useless to me now but it has a power bank function, the only issue is that the batteries can easily fall out.
Now even though I have a bunch of power banks I felt like I might as well give this thing a use by designing and printing a sleeve to keep the batteries from falling out if I use it on the go.
I took some measurements and in no time I made a simple sleeve, this " power bank" is probably not going to get used 🤣 So I didn't go all out with the design just put 2 holes in it for a bit of air flow for cooling.
40 minutes on the printer and I got my sleeve, it fit like a glove right out the bat.
I printed it out of black PETG a relatively strong material in 3d printing.
pretty nice battery charger now power bank has a usb cable that wraps around for charging, usb c and micro for charging and a usb a out for charging/powering a device
Right above are called temperature towers, see the numbers on the side that is the temperature the hot end is at as it prints each section it can help to determine the best temperature for a specific filament, I was using it as a diagnostic because the quality on my big printer took a hit I was not sure what was happening, I thought maybe the material was the issue, perhaps the settings? After trying things out I suspected the nozzle may have gotten worn, I quickly swapped it out and put in a hardened steel variant instead of the standard brass nozzle it had, was a fairly quick job maybe 15 minutes, I also installed some modifications I printed to hold the printers cables better than stock.
Gave it a bit a clean and powered it up and now it's back to printing beautifully.
3d Printing ain't that easy you have to be able to figure out what is going wrong,
even at work the disabled man I work with is having printer issues I been trying to figure that out for him for a while to no avail but I think I finally figured out what is the issue and next week I should have him back to printing quality.
Reblog lottery
We got 32 participants for our reblog lottery this time around.
@blessed-20 @blitzzzz @chaosmagic23 @cup-bearer @daddydog @duckmotor @ecencypoints @ekads @ene22 @ferod23 @florakese @henruc @hjrrodriguez @jenam @jhonnygo @kungfukid @ladymisa @miriammarga @mirroredspork @mxm0unite @olaf.gui @pepetoken @revolverocelotyt @seki1 @servelle @stekene @trautenberk @vaynard86 @vrezyy @ydm6669 @youloseagain and @yova
and the winner this time around is....
Looks like we got a dud, better luck next time!
@kungfukid ! Congratulations enjoy your 10% profit share on this post, 0.33 DUO tokens, 5 HBI units more about HBI units here
The reblog lottery continues so be sure to reblog this post to qualify, for a minimum 10% profit share, 0.33 DUO token and 5 HBI units (bonus wheel) on my next post
This is all done automatically and I apply the winner to be a beneficiary for the post.
Only reblogs before tomorrow 8pm Eastern Standard Time qualify for the lottery.
I am a financial advisor ! If you can't take personal responsibility for you investing, I hate to brake it to ya, but you ain't nothing but a sucka, you supposed to lose your shit.
@bitcoinman's bits of wisdom
- Invest only what you can afford to lose and be mindful of the potential risks.
- Unless you can accept delivery stay away from futures and stick to physical.
- Leverage is a great tool for losing money fast.
- Numismatics for the lows stick to smart stacking baby.
- Be cautious of new schemes in crypto, like ICOs, DeFi, and NFTs, do your research before investing.
BUY/SELL PRECIOUS METALS WITH HBD + PRECIOUS METALS TOOLS AND ACCESSORIES
![](https://images.hive.blog/768x0/https://files.peakd.com/file/peakd-hive/bulliontools/1000033547.jpg)
Buy DUO and stake to receive Hive dividends, tip others, have your posts curated and grow Hive!
Learn more about DUO here
https://tribaldex.com/trade/DUO
https://hive-engine.com/trade/DUO
![](https://images.hive.blog/DQmQXTEY3Qr4S8LM6TpCpXYL1a4V4616ntyTdTXUduAMB5G/SGS_banne2022.png)
You can find out more about the #silvergoldstackers community in this post here
![](https://images.hive.blog/768x0/https://i.imgur.com/7JSC9uA.png)
Weekly Post Schedule
Day | Post |
---|---|
Monday | Art&3D |
Tuesday | |
Wednesday | |
Thursday | |
Friday | Stacker of the week |
Saturday | Lazy Saturday post |
Sunday |
Profit share
10% of this post earnings go to @kungfukid for being our reblog lottery winner.
That's it for today's post thanks for stopping by your support is truly appreciated.
Posted Using InLeo Alpha