Today new Type C chargers arrived at the store, a total of 120 arrived, but they were distributed in the three branches that we currently have, so today in each of the three stores we had to finish arranging the chargers, because as you can see in the image below, the chargers and the vast majority of technology products, arrive separately and our job as a store is to finish packing the product.
Sometimes orders arrive with incomplete items, but luckily in this order everything arrived as it should, a good package of 120 Type C cables and 120 chargers or charge regulators, and along with them the 120 plastic bags to pack the chargers.
This brand is (CitruxPlus) a brand that is the second time coming to the store, and personally I think they are of better quality than the Plus brand chargers, besides being Fast Charge chargers, they are in high demand in the store, so in the category of phone chargers, this type of chargers have the priority and we can not let them run out because we lose many sales.
After packing the chargers, I took some pictures to start spreading them on social networks and with the customer contacts I have in my phone, these chargers have a value of only 6$ per unit, and 2.5$ wholesale, they are very competitive prices for a very good quality.
I spent a good part of my morning in packing the chargers and taking pictures and spreading them in the networks and frequent customers, I do not know if you have already bought this type of chargers of this brand, it would be great to know your experience of use with this brand.
It is no secret that the phones that are currently coming out are using a TYPE C charging port, this is much better than the old micro or V8 port that phones used to have, as V8 charging ports tend to get damaged more often, which is not the case with type C charging ports.
This is the reason why our charger order focused on type C chargers.
Today arrived at our repair shop, a phone which, according to the customer, had a fault with the phone signal, because at the time of placing the chip of your network provider, the phone did not show any signal and therefore could not make or receive calls or messages, as well as the data could not be activated.
The customer told us that she had already taken the phone to another service center for repair, and they told her that the fault was the radio frequency antennas, but the customer told us that they repaired the phone and that it only lasted two weeks and it was again with the same fault, and when we opened the equipment, we realized that the repair that they did in the other service center, was something improvised and that was the reason for the fault to appear again.
And this is where I will tell you, whenever you send a phone to be repaired, it is good that before taking it out of the repair shop, you demand that they show in depth what was the repair, and that you realize that it is a good job, because the proper repair for this phone was to change the radio frequency antennas, and everything would be working at 100%.
But what they did here and as you can see in the picture above, is that they soldered a small cable from the board, to the connector that intensifies the signal, which is on the back cover of the phone, look at the picture in detail and you will notice that at the bottom of the phone you can see the cable they soldered, this is not a good job.
The rest of my day was just doing phone reviews that we had pending, because much of the afternoon was rainy and for that reason the customers did not come to the store, so it was a pretty relaxed evening, plus we closed a little late, at about 8 pm and even at that time it was raining.
This was the last picture of the day, where you can see the motorcycles that are used in the store to look for spare parts or merchandise and move it to other branches, so far this was my summary of the day, and I hope your day was also great.
Posted Using InLeo Alpha