Lasts Projects of my First Run of Instruments: Venezuelan Cuatros #10

in #hive-1896412 years ago

Well, if the end of the line for the first run of instruments. These two close the 10th spot and the work of two years of learning and growth. You might wonder why 2 if I was on my 9th. It's simple. The first wasn't made entirely on my own. That's the whole deal. So, now I'm in the way towards 10 instruments made on my own.


The twins

The idea of making two instruments at the same time isn't new. I have worked on simultaneous projects before. However, I have never done two instruments so fast.

IMG_20220617_091523.jpg


Parts

These two were the perfect projects to test some woods that I had acquired last year. And they are also a comeback of the same cedrala I used for Venezuelan Cuatro #9. So even when their fronts are pale, they have an amazing flamed pattern on the sides and back.

Sound boards

IMG_20220605_095202.jpg

IMG_20220605_134921.jpg

These are the pale woods that I had. There's still a lot of them for more instruments. On the rear side we have the come back of Simarouba Amara a.k.a, White Cedar. On the front, we have a newcomer. It might surprise you to know that this same wood is used for broomsticks around the country. It is known as Gmelina arboreal it is a wood that comes from southeast Asia and it is very common around here. It is used a lot for electric instruments since it's white colour gets stained easily.

Sides and backs

This is the return of my awesome flamed cedrala. It is gorgeous! No more words needed.

IMG_20220522_165438.jpg

IMG_20220529_161622.jpg

IMG_20220607_144804.jpg

Take a moment to look at the ornaments on these backs. There won't be more ornaments on these instruments since they are White Series. But there's no need for more since they were made with patterns of stripes and a solid piece in the middle. I'm still not ready to add ornaments to the sides since this requires lamination and other shenanigans.

Necks

More cedrala doing the work on these pieces. It is an stable wood and it's easy to work. There's the issue with it's thickness once the neck is rounded but that is a adjustable since this is a instrument with low string tension. We have a look at different stages of the process from the cut of the head stocks, the heels and it's carvings, plus the ornaments on the former part.

IMG_20220522_143446.jpg

IMG_20220522_165805.jpg

IMG_20220605_150222.jpg

IMG_20220605_154843.jpg

IMG_20220605_173123.jpg

IMG_20220605_173107.jpg

Tell me this new headstock design isn't a beauty? It is inspired on my teacher's design. I have a template for that one provided by himself. I have all the right to use it but I wouldn't do it. That's his design. He came to it after looking at a ton of others. I did the same.


Assembly

With all these pieces ready, it's time to start the assembly process. I only have one mould, so don't ask how I did two instruments at the same time. It was a job of one thing at a time. There's no other way around it. Hopefully, in the future, I'll have tend moulds for each instrument.

IMG_20220606_122141.jpg

IMG_20220606_141830.jpg

Not all the pieces are present in these shots, but all will come together as we move on.

On the Mould

Once we start the assembly everything feels new. Each new project is another story. This is where the dream of the sounds it will make start. There's a lot of work to do and we work in stages.

IMG_20220607_164022.jpg

IMG_20220610_095410.jpg

IMG_20220607_164025.jpg

IMG_20220610_095415.jpg

IMG_20220610_110221.jpg

IMG_20220607_171843.jpg

Once the sound boards and necks go on the solera mould, we add the end block (where the sides are joined) and get the wood angles in place around the shaoe drawing.

I wasn't too creative for these since I named both 10 in different languages. But I didn't think any other name was fit for this occasion.

Sides and kerfing

Sides are one of the trickest part for assembly. They need to be in the right thickness for bending. And also, there's the need to cut them a bit to have them joing on the end block.

IMG_20220608_151812.jpg

IMG_20220610_145919.jpg

If you do not measure well, the sides won't meet each other on the end block. This has a fix. You just need to add an ornament and it will be fine. Also adding a piece of the same wood solves the problem. But it will show regardless. The grain of the wood is interrupted, so anything that happens there is noticeable. I'll show you an example later.

While these glue in place, we can help help with the kerfind. Those are the little wedges you see over there. These help to strengthen the are between the sound board and sides.

More reinforcements

The last reinforcements inside are for the sides the vertical ones help strengthening key areas where the instrument might get hit. The others Ara for the back.

IMG_20220609_100948.jpg

IMG_20220611_083328.jpg

IMG_20220611_094039.jpg

IMG_20220609_112002.jpg

This is the example of the aforementioned side shortage. This is how it looks like when the sides do not meet at the end block.

On this stage, we only need to remove the excess material for the sides to make room for the back.

Placing the back.

This is the lead to close the instrument. Before we place it, we need to put the label on it and cut part of the bars. Then, we need to sand any places that might not make it fit on the instrument. After all these things are done, we can finally close the instrument and let it glue properly. Another important detail to keep in mind is unscrewing the holder. It is that piece of wood you see with a screw. It pushed the instrument towards the mould. If it isn't unscrewed, the instrument will be stuck there.

IMG_20220609_143435.jpg

IMG_20220611_120949.jpg

And with the help of this rope, we make sure the pressure on the back is enough to glue properly.


Out of the mould

Taking a instrument out of the mould is like opening a Christmas present except that the magic never goes away. Well, that might be true to those who work hard to keep that magic going. Here, little effort is needed to maintain it that way.

IMG_20220610_101322.jpg

IMG_20220612_134340.jpg

Let's this be a first of me throwing a picture of myself at work. It isn't usual. But the work was to trim the borders of both instruments to get the ready for the strumming guards.

Fretboards

A piece that requieres care. The length of fretboards corresponds to a mathematical relationship between the strings, tension and other measures. You can make choose the total length, but a fact to keep in mind is that the more you reduce this measure, it will have to be more precise and the fret will be smaller. So you need to keep it comfortable.

IMG_20220614_165041.jpg

IMG_20220615_155839.jpg

IMG_20220615_171013.jpg

These fretboards aren't the same length since one instrument will have 15 frets; the other, 17. That's the difference in length. After having the ready we make use of center lines to align and glue them in place.

Strumming Guard

One of the Venezuelan Cuatro's distinctive features. The tradicional way of making these is using a thin piece of wood. But by making use of a thicker one instead, we can have a strumming guard that will last for decades of playing without needing to be replaced.

IMG_20220616_163333.jpg

IMG_20220616_174054.jpg

These are trickier to glue. I need to make some special clamps I've seen over at Stew Mac. They are pricey, but I might let something around here with some DIYness. After gluing and some trimming, we arrive at the thumbnail of this post.

IMG_20220617_091533.jpg


There's still plenty to do for with these two. They are on the stage of working on details and sanding a lot. Once they are ready for varnish, they'll join #8 for that paint job. Stay tuned for the next entry!

Sort:  

Que locura que en 21 años de vida jamás habia visto fotos de como se hace un cuatro, que genial tu trabajo mi hermano

Siempre se puede aprender algo nuevo. Muchas gracias. Saludos

What a beautiful work of art, the truth is that I admire you for your talent in making these musical instruments. God continue to bless your hands and your creativity. Very beautiful work you bring us here.

Qué bello trabajo artesanal, la verdad es que te admiro por tu talento confeccionando estos instrumentos musicales. Dios siga bendiciendo tus manos y tu creatividad. Muy hermoso trabajo nos traes aquí.

Though I'm not a believer, thanks for your kind words and time to take a look at my work!

Twins?

Congratulations :))))

Thanks. I'm still on the intense labor! 😂

Good.

Still on the labour? Five days later?

If only this was like bearing life into the world, it would be simpler. 😂

Hahaha, yeah, I imagine it's a lot of work ;)

But nothing impossible for you :D

It isn't impossible. Just as you said a lot of work. Work that's still going. 😄

I love playing the guitar. Thank you for sharing all the care and craftsmanship that goes into making one, I'm in awe of your skill. I would image the fret board takes a lot of precision. I guess that you don't know exactly how the instrument will sound until it's finished. I hope you post a video of it being played so that we can hear it.

Thanks for coming by. Indeed, there's a lot of precision involved in all the work. You get an idea of the sound by taping on the sound board before starting the project. However, it's by having everything together that the whole range of sound is revealed.

It must be quite exciting to finally hear it play hear the tone it makes. Do you reinforce the neck with a steel rod? Are they strung with steel or nylon strings? I guess the type of strings used makes a lot of difference to the amount of pressure on the head and neck.

I shall watch out for your next project.

This instruments seldom need a reinforcement like a trust rod. Those are important for acoustic guitars since those use metallic stirngs. These uses 4 nylon strings and the tension isn't too much. One can place a strip of hard wood in the back of the neck of the idea is to make it thinner. There's will be some sound tests one these and the other one are ready.

I have just realised that these aren't guitars but more like large ukuleles. I've been trying to learn to play the ukulele. Different tuning and different chord shapes. I will have to see if I can find some recordings of a Venezuelan cuatro being played.

Yeah, this are more akin to what used to be a Renaissance Guitar than an actual ukulele. Well, you're going through a rabbit hole. If you want to see some interesting stuff being done on the Venezuelan Cuatro, I recommend looking for the heavy hitters of the instrument: Jorge Glem, Cheo Hurtado, Edward Ramírez, Héctor Molina, Miguel Siso, Rafael Martínez. Just to mention a few.

I will do that. I like hearing stringed instruments I've never heard before. I may even end up getting myself a Venezuelan cuatro at some point.

Well, the more references you get, the better musician you become.