How I Used a Seam Ripper to Make a $17 Thrift-Store Jacket My Own

in #alive3 days ago

This morning I went back to a Japanese thrift store called "Marui Ichi" (Circle One) where, a couple of days ago, I'd seen three D’Urban suits priced at just 2,600 yen (about $17) each. The jackets fitted me perfectly, but the trousers were not my size. No problem - I was looking for a sports jacket to upgrade my wardrobe without emptying my wallet.

Hugo Boss Sports Jacket: $33

The first time I visited the Maru Ichi I bought a Hugo Boss jacket that was in mint condition for just $5,000 ($33).

I didn't buy the D'Urban suits even though I loved the feel and fit of the jackets because (1) I thought the arms might be a tad too long and (2) they had the previous owner's name sewn into the inside pocket, whereas the Hugo Boss jacket didn't.

Research

When I got back home I did a bit of online research about how to remove sewn-in names from a jacket, and also wanted to see if jacket sleeves that cover the shirt cuff are really such a big "no no" as some people claim.

Firstly, I discovered that the art of removing sewn-in names required a tool with a terrifying name: a "seam ripper." 😱

Next, I watched a video all about sports jackets by the "40 Over Fashion" guy which showed him wearing a sports jacket with no shirt cuff showing, no doubt because he was wearing a polo shirt!

Then, in another video I discovered the concept of the "conservative suit" which has a jacket arm cut so as not to show the shirt cuff. Incidentally, I also noticed The Donald often wears a jacket with no peeping shirt cuff.

Back to Circle One

This morning, those wonderful D'Urban suits were still on my mind, so I headed back to the thrift store and was delighted to see that all three were still on the rack. (No big surprise - there are not a lot of Japanese blokes my size who would frequent a thrift store...)

With the booty in my bag, I popped into the nearest Daiso and bought myself a 100 yen "seam ripper" and headed for home and tried on each jacket again:

DUrban1.jpg

A Ripping Afternoon

Here's a look at the inside, where you can see the previous owner's name tightly woven into the fabric of the inside breast pocket:

Durban2.jpg

Okay, this pic shows the woven name more clearly. The thread is so tightly woven than I wondered if my seam ripper would be able to make any impression upon it:

DUrban3.jpg

I spent a cheerful afternoon working with the seam ripper, starting with the threads on the inside of the pocket:

DUrban4.jpg

I was worried I might accidentally damage the lining of the jacket, so I worked slowly and used tweezers to tease out the cut threads. It took some time and patience, but eventually, I removed all the stitching without leaving a trace of the previous owner's name in thread, just a shadow where the thread had been:

Durban5.jpg

Proud Owner of a $780 Suit Jacket!

I looked up the cost of a new D’Urban suit and found that they typically sell for around 120,000 yen ($780).

DUrban6.png

Knowing that I got mine for just 2,600 ($17) yen makes me appreciate the jacket even more. (I'm going to give away or discard the trousers as they don't fit me at all. It seems the top half of the previous owner was similar in build to me, but his lower torso was far more unrestrained.)

Tomorrow I will work on removing the previous owner's name from my two other D'Urban jackets. On just those three jackets alone, it seems I saved myself $2,289 compared to buying them new!

Now to find a gent who would appreciate - and fit into - the trousers!

I hope you enjoyed my ripping yarn.

Cheers!

David Hurley
#InspiredFocus

Sort:  

@hirohurl! @fiberfrau likes your content! so I just sent 1 BBH to your account on behalf of @fiberfrau. (4/20)

(html comment removed: )

I often use a single-edged razor blade when I need to remove seams. A trick I learned when I worked bridal.

@fiberfrau! @hirohurl likes your content! so I just sent 1 BBH to your account on behalf of @hirohurl. (2/5)

(html comment removed: )

Thanks for the tip, @fiberfrau - I had a Stanley knife blade but it wasn't ideal - I'm sure a fresh razor blade would be better.
!BBH
!ALIVE


Hey @hirohurl, here is a little bit of BEER from @fiberfrau for you. Enjoy it!

Did you know that <a href='https://dcity.io/cityyou can use BEER at dCity game to buy cards to rule the world.

!BEER

!BBH

!DIY
!INDEED

So awesome! 🙌 Happy Sunday!
!WINE

(1/10)
@hirohurl! @iamraincrystal Totally agrees with your content! so I just sent 1 IDD to your account on behalf of @iamraincrystal.

Indeed Logo

@iamraincrystal just sent you a DIY token as a little appreciation for your post dear @hirohurl! Feel free to multiply it by sending someone else !DIY in a comment :) You can do that x times a day depending on your balance so:

Don't be shy - share some DIY!

You can query your personal balance by !DIYSTATS

Wow amazing DIY indeed! You're awesomely resourceful. Great savings from DIY too. So good too that Daiso has seam rippers that work well. LOL! Happy Sunday!


Made in Canva

!ALIVE

- @iamraincrystal - Moderator/Alive Video Master
_
This post has been curated by the Alive And Thriving Team, we curate good content in the We Are Alive Tribe that is on topic for #aliveandthriving, and it's included in our daily curation report on @aliveandthriving, plus @youarealive is following our Curation Trail.

I learnt how to do it by watching a Youtube video! However, Japanese tailors sew the threaded names very tightly so it's a tough job to remove the name without damaging the fabric.
!BBH
!ALIVE

Thank you for curating my post! 😊

@aliveandthriving! @hirohurl likes your content! so I just sent 1 BBH to your account on behalf of @hirohurl. (3/5)

(html comment removed: )