Monstercross Build (Final): Complete project & parts

Heeeyho Readers! It's the end of a journey.

---

Episode finale of our journey to build a bicycle is here. It's relieving to complete any project. At the same time, finishing leaves a creative void. Picking parts, modifying, planning. These are incredibly engaging and exciting. Makes me want to build another one {laughs}.

The plan was to create a fully detailed post, like a step-by-step in how to assemble a bicycle. At least... err... until I ran into problems with the headset bearings right at the beginning, which tested my anxiety and made me totally forget to record the process. Without being able to fit the headset, the entire assembly would stay on hold, so fixing the issue was on top of the list. Other than that, teaching how to assemble a bike feels pointless because of the individualities of each project.

All that said, let's jump straight into pure cycling pornography. I'll talk about the thinking behind the monstercross project as we go through the photos and give advice to those seeking to build their own two-wheeler.

^{Monstercross Puzzle}

---

I haven't coined the term monstercross. The concept derives from someone's crazy idea of combining road-cycling and mountain-biking. A monstercross is not a cyclocross either, since those tend to have narrower tires compared to knobby all-terain tires used on a monstercross. Anyyway. Search the internet and a bazillion origins will show up.

John Tomac is perhaps the most well-known cyclist credited to the idea. The more contemporaty trend puts a monstercross as nothing but a mountain-bike with drop bars. Ideas go from super modern rigs all the way down to Frankenstein builds who combine vintage frames and whatever parts that fit. There's no rules!

My project started off as a way to repurpose a handful of parts I had laying around (11 speed drivetrain, 26" wheels, vintage brakes, and cranks). An all-rigid mountain-bike would be cool, but then came the idea of fitting drop bars, except I'd need road cycling STIs that are super expensive. The cornerbar option came out much later. With the cornerbar, I'd be able to fit regular mountain-bike gear shifter and brakes to a quasi drop bar.

The initial concept is defined: a 26" monstercross, featuring mountain-biking components fitted into a specially designed handlebar. The rest unfolds naturally afterwards — frame choice guides everything.

^{Monstercross, aka Flying Fuck}

---

General tip for anyone seeking to build a bicycle from scratch: define what bicycle style you wanna build and start with the frame. A frame is the epicenter that will define every part used on the project. The geometry and correct size for your body is important, but, beyond that hides a bunch of standardized dimensions, such as steering tube diameter, bottom bracket type, frame O.L.D (Over-Lock-nut Dimension), seat tube diameter, etc.

Let's avoid discouraging readers with too much info, shall we? Grab a frame that you like and the rest will unfold (picking parts is the fun, after all).

I searched for the cheapest 90's 19" (size) frame money could buy. Why? Because 90's mountain-bikes are (in some cases) the closest in geometry to modern gravel/road bicycles. Here's the checklist.

• cheap
• with v-brake mounting posts
• size 19"
• cheap
• and also cheap

The fork and entire steering system followed my frame's dimension (1" steerer). As well as 130mm O.L.D chainstay spacing that required a road-cycling rear hub. Seat tube on this bicycle was also odd (26,4mm) that was solved with a 25,4mm seatpost wrapped on a 1mm sleeve (see here).

It's a lot easier to find rigid forks and headsets for 28,6mm (1-1/8") frames, though I was fortunate enough to find a Brazilian-made 1" aheadset fork. Pure luck, I must say. Weren't that available, I would've picked a 28,6mm frame.

^{Senqi cornerbar handlebar}

---

I mentioned earlier having issues with the steering assembly. The fork steering tube was a bit out of spec and wouldn't go through the bearings, which required fine adjustments. Altogether, the crown race provided with the headset was also off (JIS standard 27mm) whereas the fork crown race seat was standard (STD 26,4mm) — 6 decimals is enough to creak. All issues fixable.

^{Not going wrong with Shimano v-brakes}

---

With those issues out of the way, the rest is smooth sailing. I kick in some music and begin to assemble those parts presented in the previous posts. Brakes, brake pads, brake levers, cable housings, cables. I used synthetic grease on this bicycle to see how it goes over time.

One awesome feature on the braking system are the titanium v-brake mounting posts (featured here). Nobody will ever see them, but it's the kind of quality I go for. They'll most likely outlast the bicycle {laughs}. On top of that, all the steel bolts have been replaced for stainless steel. Sexy-as-fuck!

Speaking of features, I added internal cabling to this bicycle totally for aesthetics. It had exposed cables originally; now protected.

^{Internal cabling}

---

The transmission was always a giganormous bet. I simply couldn't preview if the bits and bobs would fit and speak to each other. Sure, there were measurements to account for, but fitting a modern 11 speed groupset to a vintade frame is always challenging. No one could've previewed how smooth the gear shifts are.

Here's an early 2000's Bontrager square-tapered crankset driving a 38-teeth chainring up front. Cassette, derailleur and shifter are Sram NX-11. Linking everything is a 11-speed YBN chain.

^{1x11 Sram NX drivetrain}

---

Gear ratio is good enough for flats; gotta test and see on the mountains. Lowest gear is 38x42t, which may be a tad heavy for my spaghetti legs. (Just for comparison, my 29" mtb uses 36x50t).

Tires are Kenda Small Block Eight, foldable, light-weight, fast. Couldn't be more happy with the tire choice. Another option were Maxxis Ikons, but those doubled in price.

^{Hello sexy}

---

I guess that's the overall picture of the project. Some tiny details have been added after taking the photos. One is the head badge; the other, a new stem dust cover and titanium bolt (never shown).

Full Bicycle Specs

• 1993 Two Hard (Brazilian brand) aluminum frame in size 19"
• Senqi cornerbar handlebar
• 11 speed Sram NX groupset
• 38-teeth chainring and 11-42t cassette
• Early 2000's Bontrager crank arms
• Early 2000's 26" inch rims fitted with stainless steel spokes
• Fastace sealed bearing hubs r/f
• Early 2000's Shimano Alivio v-brakes; Toopre brake levers; titanium v-brake pivots; stainless steel cables; internal cabling
• Kenda Small Block Eight 26x2.1 foldable tires
• All around stainless steel bolts and titanium stem bolt
• KSW threadless 1" fork and Chinhauer 1" threadless headset
• 1" seatpost converted into 26,4mm

Costs

It's difficult to talk about costs because exchange rates are always changing as well as market prices. Here's the complete spreadsheet. Total cost is R$ 2.043,00 (Brazilian Reals) that divided by 5,20 (~ USD/BRL) gives us a grand total of 392 USD — let's round to 400.

Expensive? I don't know... tell me what you can buy for 400 in your country. In Brazil, for 2000 Reals you won't go intermediate level, not even on second-hand markets. For the quality employed in the project that price doesn't seem bad.

What about the paint? Everyone asks me that. Let's say I ended up loving the minimalist look of gray on black with red details. For now, it's gonna stay like that... at least until I'm confident enough to paint an entire frame.

^{Parts list}

---

Conclusion

Can you build your own bicycle?

Of course! Readers may feel overwhelmed with the amount of information required to chose parts and what not. It indeed is confusing. But... I was not born knowing all of this. We've got the internet on our favor with infinite information, tutorials, forums, etc. Most of what I learned comes from endless hours trying to solve the monstercross puzzle.

The biggest legacy of this endeavor is the knowledge acquired along the way, more so than actually finishing the bicycle. And now it's done. It works.

I hope that you've enjoyed this series as much as I did researching, writing and bringing forward the information for future weirdos like myself.

One special thank you for everyone who supported my posts — each like was converted into parts or tools for this (and future) projects.

I guess that's it. Don't forget to keep on pedaling. Enjoy life, make mistakes, fix, try again.

Peace.

---

If you enjoyed this post consider leaving your upvote for a hot coffee.

Find me on Twitter: https://twitter.com/mrprofessor_

~Love ya all,

---

Disclaimer: The author of this post is a convict broke backpacker, who has travelled more than 10.000 km hitchhiking and more than 5.000 km cycling. Following him may cause severe problems of wanderlust and inquietud. You've been warned.

---

I'm Arthur. I blog about Adventure Stories, Brazil, Travel, Camping, & Life Experiences.

Follow me to stay tuned for more craziness and tips.